HBOC
Apr 18, 05:36 PM
It is a nice shot. I would crop off the right side, as there is half a leaf. Also, I would have liked to see what a sunset or sunrise of this spot would look like.
MrMacMan
Oct 20, 09:48 PM
Originally posted by Macmaniac
Blackspot was a very active user of the Mac collecters section, he had a pretty big collection.
Ha, Blackspot ran alot of stuff around... everywhere.
Blackspot was a very active user of the Mac collecters section, he had a pretty big collection.
Ha, Blackspot ran alot of stuff around... everywhere.
maflynn
Nov 12, 10:29 AM
We have an OSX forum, to discuss OS related issue, why not for iOS.
talmy
Mar 2, 12:15 PM
I'm a bit disturbed that you have turned Wifi on and have joined a second network? Presumably the server is also on a wired LAN. Since this is a recent change, it sure looks suspect. Maybe there is some loop so that the system is appearing twice (although BonJour doesn't go across subnets AFAIK).
jsw
Sep 23, 12:24 PM
Periods shouldn`t be inside of paranthese (unless it`s a compete sentence), so you might not want to do that...
Ah... I thought he was talking about "sunrises".
Ah... I thought he was talking about "sunrises".
itickings
Apr 8, 01:12 PM
I seem to be able to receive packets from outside my LAN...
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
-aggie-
Apr 10, 03:03 PM
Reading through all the Faqs I�m still not sure how many points I�ll earn. I see the �credit� here:
http://vspx27.stanford.edu/psummary.html
I�m currently doing 6074 mutant scan. What are the points?
http://vspx27.stanford.edu/psummary.html
I�m currently doing 6074 mutant scan. What are the points?
Thisisgeorge
May 6, 09:03 AM
I suggest the NZXT cooler.
http://www.newegg.com/Product/Product.aspx?Item=N82E16834997340
http://www.newegg.com/Product/Product.aspx?Item=N82E16834997340
OPTiK
Mar 13, 12:05 PM
http://www.redmondpie.com/jailbreak-4.3-on-windows-iphone-4-3gs-ipad-ipod-touch-using-sn0wbreeze-how-to-guide/
sn0wbreeze is pro... after trying to get pwnagetool to work for hours yesterday, i used the new sn0wbreeze release and got my ipad to tethered 4.3 JB in about 10 minutes! :)
sn0wbreeze is pro... after trying to get pwnagetool to work for hours yesterday, i used the new sn0wbreeze release and got my ipad to tethered 4.3 JB in about 10 minutes! :)
Blipp
Apr 28, 09:40 AM
4 pin = 400 FW no power - used on DV video cameras
6 pin = 400 FW with power - HD's, scanners, etc
9 pin = 800 FW with power
The great thing about firewire... no processor power is used, unlike USB that uses the processor.I've always heard the 6pin variant referred to as FW600 while FW400 was reserved only for the mini 4pin which doesn't have power. I realize it may not be technically correct but it's always allowed easier differentiation between the two connectors.
6 pin = 400 FW with power - HD's, scanners, etc
9 pin = 800 FW with power
The great thing about firewire... no processor power is used, unlike USB that uses the processor.I've always heard the 6pin variant referred to as FW600 while FW400 was reserved only for the mini 4pin which doesn't have power. I realize it may not be technically correct but it's always allowed easier differentiation between the two connectors.
Mudbug
Aug 22, 09:16 PM
You could always try adding a few frames to get it to run smoother.
yeah - it's hesitating every 4th frame for me which is really distracting...
yeah - it's hesitating every 4th frame for me which is really distracting...
fabian9
May 3, 11:16 AM
Hi, if I want to update my jailbroken iPhone will I need to restore it before (or at any point during)?
I realise I'll lose my jailbreak, but I'm just wondering if it would require a restore.
(Sorry if it's been asked over and over again but I can't find anything that directly answers this question.)
To answer your question, I just upgraded from JB 4.3.1 to JB 4.3.2 without restoring. Just updated to stock 4.3.2 in iTunes, then ran redsn0w over it to jailbreak, then reinstalled all my JB packages.
Not sure if not going through a full restore will have any adverse affects, I certainly haven't noticed any yet though!
I realise I'll lose my jailbreak, but I'm just wondering if it would require a restore.
(Sorry if it's been asked over and over again but I can't find anything that directly answers this question.)
To answer your question, I just upgraded from JB 4.3.1 to JB 4.3.2 without restoring. Just updated to stock 4.3.2 in iTunes, then ran redsn0w over it to jailbreak, then reinstalled all my JB packages.
Not sure if not going through a full restore will have any adverse affects, I certainly haven't noticed any yet though!
mthq
May 3, 05:46 PM
Hi Guys,
I'm trying to help to friend. She have 3 year old boy and 3 years worth of pictures of him on the 3gs. Unfortunately the phone was dropped and screen was cracked (all black) she managed to put passcode lock so many times incorrectly that the device got locked.
She got screen replaced but now it says - Phone is locked please connect to iTunes. When connecting iTunes only restore is available.
The most important thing is to take those pictures of the phone!
Any thoughts what I could try to get them off the phone?
She never synced the phone with iTunes (maybe once initially not even on her PC)
I'm trying to help to friend. She have 3 year old boy and 3 years worth of pictures of him on the 3gs. Unfortunately the phone was dropped and screen was cracked (all black) she managed to put passcode lock so many times incorrectly that the device got locked.
She got screen replaced but now it says - Phone is locked please connect to iTunes. When connecting iTunes only restore is available.
The most important thing is to take those pictures of the phone!
Any thoughts what I could try to get them off the phone?
She never synced the phone with iTunes (maybe once initially not even on her PC)
OutlawImmortal
Apr 23, 08:32 PM
My wife has downloaded a couple of movies via itunes but for the life of me I have burned through dvd after dvd and cant get them to work. He keeps telling me I have a data error when I pop the DVD into one of our players.
What am I doing wrong?
What am I doing wrong?
Stella
Apr 11, 05:13 PM
http://www.9to5mac.com/60892/windows-app-store-thats-just-microsoft-being-microsoft/
http://i.imgur.com/Xzb8O.png
This screenshot doesn't look anything like Mac AppStore IMO, and doesn't resemble iTunes ( the iOS AppStore ) either, much. It looks much more 'windows' like than Apple-like. If I looked at that screenshot without knowing its an appStore I'd immediately guess 'windows' over Apple.
http://i.imgur.com/Xzb8O.png
This screenshot doesn't look anything like Mac AppStore IMO, and doesn't resemble iTunes ( the iOS AppStore ) either, much. It looks much more 'windows' like than Apple-like. If I looked at that screenshot without knowing its an appStore I'd immediately guess 'windows' over Apple.
Koodauw
Nov 28, 11:38 PM
Can I ask how much the keyboard went for?
I have one I would like to sell, but im not sure where to price it.
I have one I would like to sell, but im not sure where to price it.
masterjedi73
Sep 17, 06:03 PM
As I said before...
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
OK. thanks. I was at the apple store today and i told the salesperson that i wanted 1 gig of ram. he offered me a 1 gb stick, or two 512s. That's why i was confused. I told him that i thought they needed to be in pairs, and he said no.
thanks.
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
OK. thanks. I was at the apple store today and i told the salesperson that i wanted 1 gig of ram. he offered me a 1 gb stick, or two 512s. That's why i was confused. I told him that i thought they needed to be in pairs, and he said no.
thanks.
Damo01
Apr 22, 02:46 AM
Your problem may have something to with your virtual Machine your using according to screenshots, which probably using up all your 3 GB installed RAM. Look as though your mac is just using 3 GB RAM instead of 6 GB RAM.
bluehill
May 2, 09:38 AM
The performance tool is showing leak at this position( red color).
NSString *street = [[NSString alloc] initWithString:[dictContact objectForKey:@"add"]];
NSString *city = [[NSString alloc] initWithString:[dictContact objectForKey:@"city"]];
NSString *state = [[NSString alloc] initWithString:[dictContact objectForKey:@"state"]];
NSString *pin = [[NSString alloc] initWithString:[dictContact objectForKey:@"pin"]];
NSMutableString *address = [[NSMutableString alloc] initWithFormat:@"%@+%@+%@+%@",street,city,state,pin];
[address replaceOccurrencesOfString:@" " withString:@"+" options:NSCaseInsensitiveSearch range:NSMakeRange(0, [address length])];
[street release];
[city release];
[state release];
[pin release];
//NSLog(@"Address %@",address);
MapViewController *mvController = [[MapViewController alloc]init];
[mvController setAddress:address];
[self.navigationController pushViewController:mvController animated:YES];
[mvController release];
[address release];
NSString *street = [[NSString alloc] initWithString:[dictContact objectForKey:@"add"]];
NSString *city = [[NSString alloc] initWithString:[dictContact objectForKey:@"city"]];
NSString *state = [[NSString alloc] initWithString:[dictContact objectForKey:@"state"]];
NSString *pin = [[NSString alloc] initWithString:[dictContact objectForKey:@"pin"]];
NSMutableString *address = [[NSMutableString alloc] initWithFormat:@"%@+%@+%@+%@",street,city,state,pin];
[address replaceOccurrencesOfString:@" " withString:@"+" options:NSCaseInsensitiveSearch range:NSMakeRange(0, [address length])];
[street release];
[city release];
[state release];
[pin release];
//NSLog(@"Address %@",address);
MapViewController *mvController = [[MapViewController alloc]init];
[mvController setAddress:address];
[self.navigationController pushViewController:mvController animated:YES];
[mvController release];
[address release];
mrk2010
Dec 28, 01:17 AM
I think I've figured out what the issue is, so I'm posting for the benefit of any user who may come across this problem in the future.
I was sharing a folder on an NTFS partition on my hard drive. The NTFS partition is intended to be used as a shared storage space between my dual-boot OS's of Windows 7 and OS X on my MacBook (since Windows 7 is unable to read from the HFS+ file system that OS X uses).
When I tried sharing a folder on my Macintosh HD (in the HFS+ file system), I was able to have the settings stick. I'm not sure why it didn't allow the settings for the NTFS volume to stick, especially since I have NTFS-3G installed to enable write access to the volume, as well as read. (By default, OS X doesn't allow write access to NTFS file systems). I'm guessing that this is a bug that would be fixed in the future when OS X supports writing to NTFS volumes natively.
So, if you want to share something on your Mac over the network, and you want to define users and their permissions, you should make sure that the folders that you're sharing are on a drive or partition formatted to HFS+.
I was sharing a folder on an NTFS partition on my hard drive. The NTFS partition is intended to be used as a shared storage space between my dual-boot OS's of Windows 7 and OS X on my MacBook (since Windows 7 is unable to read from the HFS+ file system that OS X uses).
When I tried sharing a folder on my Macintosh HD (in the HFS+ file system), I was able to have the settings stick. I'm not sure why it didn't allow the settings for the NTFS volume to stick, especially since I have NTFS-3G installed to enable write access to the volume, as well as read. (By default, OS X doesn't allow write access to NTFS file systems). I'm guessing that this is a bug that would be fixed in the future when OS X supports writing to NTFS volumes natively.
So, if you want to share something on your Mac over the network, and you want to define users and their permissions, you should make sure that the folders that you're sharing are on a drive or partition formatted to HFS+.
JackT06
Feb 15, 08:01 AM
I need to find out how to make it so that the user can change the font size... But i'm unable to find an online tutorial on how to do it.
I want to make it so that in the footer there are 3 different buttons, which will make the font smaller, the same, and then bigger.
Thanks
I want to make it so that in the footer there are 3 different buttons, which will make the font smaller, the same, and then bigger.
Thanks
WardC
May 8, 12:55 PM
Nice picts Ward, can you get 8-10 hrs on the batteries?
I used to love playing crystal quest on my MacPortable.
I'm sure you are running some AfterDark screen savers as well.
Does anyone remember the "Barney Blaster" screen module?
I was NOT allowed to play that in front of my young nieces/nephews back then.
http://db.tidbits.com/article/1762
The batteries last a long time once they are charged. They can sit for a long, long time and they don't lose their power. I will try to get some shots running After Dark, I have it installed on my M5126. The Fish module is great!!
I used to love playing crystal quest on my MacPortable.
I'm sure you are running some AfterDark screen savers as well.
Does anyone remember the "Barney Blaster" screen module?
I was NOT allowed to play that in front of my young nieces/nephews back then.
http://db.tidbits.com/article/1762
The batteries last a long time once they are charged. They can sit for a long, long time and they don't lose their power. I will try to get some shots running After Dark, I have it installed on my M5126. The Fish module is great!!
Saladinos
Jul 23, 02:34 PM
The first preview had a lot of major bugs. It may be near feature complete, but I agree that they need to spend time and ensure the IDE is stable before they make a GM.
They'll just use fix-it and ship it next week :)
XCode 3 is way old. It was released with Leopard. Since then, we've only really had minor revisions (3.1, 3.2) and very infrequent intervals (3.2 released with snow leopard). I would expect Apple have been working on this for a very long time already.
Many of those features (e.g. the static analyser, which came with 3.2) could very well have been the result of development done for XCode 4.
Since the product was announced which such fanfare at WWDC, I would imagine a release would happen in the next few months. Possibly with the iPad's OS4 update (predicted to be around late August/September).
EDIT: In case anybody was worried, XCode 4 by default installs in to its own folder (/Xcode4) and can co-exist with 3.X. It can open 3.X projects and does not "upgrade" them or make them incompatible with earlier versions.
They'll just use fix-it and ship it next week :)
XCode 3 is way old. It was released with Leopard. Since then, we've only really had minor revisions (3.1, 3.2) and very infrequent intervals (3.2 released with snow leopard). I would expect Apple have been working on this for a very long time already.
Many of those features (e.g. the static analyser, which came with 3.2) could very well have been the result of development done for XCode 4.
Since the product was announced which such fanfare at WWDC, I would imagine a release would happen in the next few months. Possibly with the iPad's OS4 update (predicted to be around late August/September).
EDIT: In case anybody was worried, XCode 4 by default installs in to its own folder (/Xcode4) and can co-exist with 3.X. It can open 3.X projects and does not "upgrade" them or make them incompatible with earlier versions.
ctyhntr
Feb 20, 06:23 PM
Unlike some other countries, where loser pays. We have a court system where you don't get penalize for bringing unwarranted lawsuits. Therefore, it gets expensive to mount a defense.
The Library of Congress already rule jb is legal. Try again.
Whatever 'muscle' is? All you need to sue someone is money and both Apple and Sony have more than enough.
The Library of Congress already rule jb is legal. Try again.
Whatever 'muscle' is? All you need to sue someone is money and both Apple and Sony have more than enough.
0 comments:
Post a Comment