indyanguy
08-07 09:17 AM
sometimes, labor subs can be genuine cases as well....
wallpaper Care Bears Rainbow iPhone
Michael chertoff
02-01 09:04 PM
Hi Everyone,
My AP is valid until JUNE 27 2011, (Here is the line from the I-512L, Presentation of the Original Document prior to June 27 2011 allows a customs and border protection inspector at a port-of-entry to parole the named bearer) I'm travelling to India during May / June and will be entering LAX back on June25. Will this be an issue as my AP is expiring in next couple of days.
Experts please let me know your thoughts on my situation whether it is safe to travel and getting in back will not be of an issue.
Thanks if you can help me out
Regards
Karthik
why dont you apply for renewel?
Thanks
MC
My AP is valid until JUNE 27 2011, (Here is the line from the I-512L, Presentation of the Original Document prior to June 27 2011 allows a customs and border protection inspector at a port-of-entry to parole the named bearer) I'm travelling to India during May / June and will be entering LAX back on June25. Will this be an issue as my AP is expiring in next couple of days.
Experts please let me know your thoughts on my situation whether it is safe to travel and getting in back will not be of an issue.
Thanks if you can help me out
Regards
Karthik
why dont you apply for renewel?
Thanks
MC
SGP
12-09 02:15 PM
Good to see at least some movement in EB3-I
2011 layout photos » carebear
Life2Live
11-06 07:31 AM
My 485 petitions returned now we are in process of resubmitting. However, I see my I-140 was applied in Nebraska on Feb 07 and later my 485 petition on Aug 07 was sent to Texas from my employer. I do understand there are intertransfer between Nebraska to Texas.
My question is it right to submit 485 pettion to Texas when I-140 is pending at Nebraska? Gurus! please answer ASAP so that I can make sure atleast my company files in correct service center this time.
My question is it right to submit 485 pettion to Texas when I-140 is pending at Nebraska? Gurus! please answer ASAP so that I can make sure atleast my company files in correct service center this time.
more...
kiru_99
10-30 02:25 PM
I called the USCIS they told me that it is rejected b'couse of Filing Fee. I left a message to my lawyer & my employer they didn't get back to me yet. Waiting for there reply
ajay
06-07 05:11 PM
Guys who get RFE should keep a close watch on the receipt of the notice within 10 days from RFE issue date, if you don't receive it make sure you call them and get the RFE faxed or resent, the deadline to RFE respond wont be extended no matter what you do, this is based on my personal experience.
I got an RFE on May15'09, till date i have not received it, i did manage to get the RFE contents faxed to me after waiting 15 days but the medical form is lost somewhere, i am still working on responding to the RFE before June14'09 deadline.
Thanks for the info. Please try to update the status of your RFE when it is done.
I got an RFE on May15'09, till date i have not received it, i did manage to get the RFE contents faxed to me after waiting 15 days but the medical form is lost somewhere, i am still working on responding to the RFE before June14'09 deadline.
Thanks for the info. Please try to update the status of your RFE when it is done.
more...
sunny1000
12-07 03:08 PM
Thanks everyone for the replies. Appreciate it.:)
2010 Care Bears
imm_check
11-05 09:01 AM
I think this has happened a lot and not sonething to worry about before December. If by then you haven't received the receipt - then call them.
Thanks to one and all for your feedback....i shall wait for some more days before talking to USICS
Thanks to one and all for your feedback....i shall wait for some more days before talking to USICS
more...
gg_ny
04-07 06:19 PM
Here's another parallel Idea.
Let us try to schedule a meet with the prospective presidential Candidates (McCain, Clinton and Obama) instead to let them know our issues.
By the time we actually get a meeting with the current president, his term may have expired. The presidential candidates, on the other hand will have some time now (not a whole lot but a little). If we squeeze some time there, we may be able to atleast get our issues out there.
This is outrageaous. Three postings above, i had suggested the same idea. How come you are not even acknowledging my posting when you (essentially)reword the content? It does appear from your mail that you had been following up the postings in the thread.
Let us try to schedule a meet with the prospective presidential Candidates (McCain, Clinton and Obama) instead to let them know our issues.
By the time we actually get a meeting with the current president, his term may have expired. The presidential candidates, on the other hand will have some time now (not a whole lot but a little). If we squeeze some time there, we may be able to atleast get our issues out there.
This is outrageaous. Three postings above, i had suggested the same idea. How come you are not even acknowledging my posting when you (essentially)reword the content? It does appear from your mail that you had been following up the postings in the thread.
hair The Care Bears Movie - Movie
saileshdude
03-26 03:34 PM
My husband recieved a transfer notice for his I-485 from TSC saying that the
"Preliminary Processing of the application has been completed, and it has been transferred to USCIS office at Lee's summit , MO 64064. The office will notify you when they schedule an interview on the application."
I am the primary applicant and I am on H1. My husband was on H4 and now he is on EAD. My PD is July-04. Is any body in the same situation as me and received such transfer notice. I am really anxious about this. Please let me know is it somethign to worry about and what I take for the interview when I am called.
I will greatly appreciate any help with this.
Thanks.
Seems to me like TSC is processing application based on priority date rather than processing date posted. This seems to be different from NSC which usually goes by the processing date. Lately I have heard of couple of cases whose priority date were or close to being current and they were either sent an RFE or called for interview.
Anyway to OP, there are bunch of threads here on which talk people talk about their interview experience. All you can do is go through them , talk to your attorney and prepare accordingly.
"Preliminary Processing of the application has been completed, and it has been transferred to USCIS office at Lee's summit , MO 64064. The office will notify you when they schedule an interview on the application."
I am the primary applicant and I am on H1. My husband was on H4 and now he is on EAD. My PD is July-04. Is any body in the same situation as me and received such transfer notice. I am really anxious about this. Please let me know is it somethign to worry about and what I take for the interview when I am called.
I will greatly appreciate any help with this.
Thanks.
Seems to me like TSC is processing application based on priority date rather than processing date posted. This seems to be different from NSC which usually goes by the processing date. Lately I have heard of couple of cases whose priority date were or close to being current and they were either sent an RFE or called for interview.
Anyway to OP, there are bunch of threads here on which talk people talk about their interview experience. All you can do is go through them , talk to your attorney and prepare accordingly.
more...
ps57002
09-30 08:37 AM
My PERM approval came through Aug 14, so all done in a hurry. 140/485 (concurrent-mailed) /ead/ap sent aug 16th, received on aug 17.
Since it was done quickly, couldn't wait for PERM hard copy approval (came 1 wk later), 140 was submitted without PERM approval hard copy. lawyer included printout of ETA 9089 approval/form from online with OBM approval number on it, signed by me/employer. Also included screen shot from DOLETA of perm approval.
My question...from anyone else's experience/info
Will I get a RFE for the PERM LC hard copy or a rejection?
How does that affect my pending EAD/485? think i know answer..all goes down, right?
I hope I get a RFE, not rejectiong on 140.
anyone have any info, experience, please share..
Since it was done quickly, couldn't wait for PERM hard copy approval (came 1 wk later), 140 was submitted without PERM approval hard copy. lawyer included printout of ETA 9089 approval/form from online with OBM approval number on it, signed by me/employer. Also included screen shot from DOLETA of perm approval.
My question...from anyone else's experience/info
Will I get a RFE for the PERM LC hard copy or a rejection?
How does that affect my pending EAD/485? think i know answer..all goes down, right?
I hope I get a RFE, not rejectiong on 140.
anyone have any info, experience, please share..
hot hi care bears teddy picture
niklshah
08-25 11:02 PM
Hi all!
I did quick search on this website and notice nothing about infopass experience at Detroit, MI office ( ... I am sure someone smarty pants is going to say I didn't search hard enough), anyway I wanted to share my expereience, so started this thread.
I have apointment tommorow, and will share what happened ( or didn't). If you had been already thru this, please feel free to share pointers.
Regards and Peace!
I had info pass at detroit office last year regarding my EAD application. They were of no help, they called just in few minutes but it was of no help guy was really rude and he did not want to see any documents which i wanted to show him. so it was of no use. than i went to Senator Levin's office and they were of real good help they followed up on my case and i got my approval in couple of days.
anyways
good luck for your meeting.
I did quick search on this website and notice nothing about infopass experience at Detroit, MI office ( ... I am sure someone smarty pants is going to say I didn't search hard enough), anyway I wanted to share my expereience, so started this thread.
I have apointment tommorow, and will share what happened ( or didn't). If you had been already thru this, please feel free to share pointers.
Regards and Peace!
I had info pass at detroit office last year regarding my EAD application. They were of no help, they called just in few minutes but it was of no help guy was really rude and he did not want to see any documents which i wanted to show him. so it was of no use. than i went to Senator Levin's office and they were of real good help they followed up on my case and i got my approval in couple of days.
anyways
good luck for your meeting.
more...
house Care Bear Kiss Wallpaper
willIWill
04-30 02:38 PM
Shisya,
Ascetic, EBX-Man are right, you need affidavits in those situations.
Get the affidavit in a non-judicial Bond paper sworn and attested before a notary public from both Parents, that should be sufficient, you do need to go to a magistrate.
Ascetic, EBX-Man are right, you need affidavits in those situations.
Get the affidavit in a non-judicial Bond paper sworn and attested before a notary public from both Parents, that should be sufficient, you do need to go to a magistrate.
tattoo carebear - 193403
sanjay
02-23 10:21 PM
I need an info from some one who had filed AC21 with an attorney. I want to apply my AC21 and asked my attorney to do so. But he is asking for $1500.00. Is this amount normal or I was asked for an abnormal amount. I thought its just informing USCIS by sending a letter only. But, is he charging me $1500 just to draft a letter?
I am looking for a constructive answer instead of vague assumptions / replies. It's an urgent issue for me to deal with.
I am looking for a constructive answer instead of vague assumptions / replies. It's an urgent issue for me to deal with.
more...
pictures Care Bears Wallpaper
bombaysardar
07-23 03:35 PM
J. BARRRET - Jul 2nd at 10:25 AM
same person, same time :)
same person, same time :)
dresses let#39;s add our Care Bears.
tigerlibra
09-29 05:52 PM
Hello,
Does anyone have any suggestions ?
Thank you...
Does anyone have any suggestions ?
Thank you...
more...
makeup Care Bears Wallpaper
a_yaja
02-04 05:09 PM
I guess you should be good with your AP . But also there was a thread about one of the IV'ians AP experience at SFO. Please read that so can understand what AP is for and when it can be used as per the IO at SFO airport
I don't think that having AP you can bypass your criminal record. The officer at the POE will have to make the determination if you are eligible or not. I recently read (I don't have the link to back it up) that a Vietnameese lady well in her 40s who had a green card (she was not a citizen) had a drug possession (it was not even possession with intent to sell) conviction and that the officer at the POE told her that she was inadmissible and that she had to go back from where she came.
The only people who are granted entry without any questions irrespective of anything in their background are US citizens. Everyone else can be refused entry at the POE if found inadmissible.
I am not sure if spouse battery qualifies as a deportable offense. If it does, I would expect that there will be problems at the POE on the way back.
Consult your attorney and see what he/ she says. If domestic battery is a deportable offense, even a green card may not help you.
I don't think that having AP you can bypass your criminal record. The officer at the POE will have to make the determination if you are eligible or not. I recently read (I don't have the link to back it up) that a Vietnameese lady well in her 40s who had a green card (she was not a citizen) had a drug possession (it was not even possession with intent to sell) conviction and that the officer at the POE told her that she was inadmissible and that she had to go back from where she came.
The only people who are granted entry without any questions irrespective of anything in their background are US citizens. Everyone else can be refused entry at the POE if found inadmissible.
I am not sure if spouse battery qualifies as a deportable offense. If it does, I would expect that there will be problems at the POE on the way back.
Consult your attorney and see what he/ she says. If domestic battery is a deportable offense, even a green card may not help you.
girlfriend grow up – iphone wallpaper
helpfriends
04-15 11:55 AM
It's not for me(thank goodness!). I was just curious - someone else I know has done this.
hairstyles Care Bears - Fanpop
kartikiran
01-14 10:48 AM
Mine was Renewal
snathan
01-28 01:35 PM
I am trying to collect a list of some prominent people (scientists, doctors, entrepreneurs, etc.) who are EB immigrants or were/are on H1 for an article. Please share if you happen to know or can point to such information. For example, orkut was invented by a former H-1B visa holder. Any examples with relevance in the current economic situation will be specially useful. For example, somebody who immigrated to US on EB category is now running a business and/or employing Americans.
Thanks!
1. Sheela Murthy
2. Indra nooyi
3. Vikram Pandid
4. Google Founder
5. One of the Google Director/scientest from india - who found the Google news
6. One of the Sun micro system's co-founder was indian.
You can find lots people in the internet.
Thanks!
1. Sheela Murthy
2. Indra nooyi
3. Vikram Pandid
4. Google Founder
5. One of the Google Director/scientest from india - who found the Google news
6. One of the Sun micro system's co-founder was indian.
You can find lots people in the internet.
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
0 comments:
Post a Comment